I needed to flash the operating system onto a Raspberry Pi CM4 with eMMC storage to use it in the BTT Klipper Pad 7. This process is more complex than using an SD card. This guide assumes you're using macOS. Here are the steps I followed: 1. Set…
Mainsail appears to come installed by default. You can access the Mainsail dashboard by appending :8819 to your Sonic Pad's IP. For example: http://192.168.1.56 would become http://192.168.1.56:8819…
Found this beauty on Esty. Most weird mechcanical keyboards have been opensourced, however this one wasn't. I looked all over Github, keybort Discords, etc. for the source files but they weren't there. And no one had made a clone (yet). adds to cart Upon receiving the…
Thankfully, optical drives are a thing of the past. Old mediums have a tendency to make a comeback but hopefully CD/DVD's go the way of zip disks, laser disks, and floppies. Never to be seen or heard from again. Long story short: I have a DVD, I…
Overview Something this cute should be illegal. I saw this on https://keyhive.xyz and picked up one up. Build Log First thing I did was place the switches into the case. Next I placed the dampening foam into the case. The foam seems like practical joke for this little…
Overview The BDN9 is a macro pad produced by Keebio. It supports four layouts: 3x3 grid, single rotary encoder in the top left or top right, or dual rotary encoders. I followed the guide at keeb.io. Doing the building part Started by soldering all the resistors. next for the…
Getting Started The first thing I did after receiving the board was plug it in, connect the TRRS cable, and flash the VIA version of QMK onto the board. It works, the LEDs work, and after testing each switch socket with tweezers, they work. Time for the fun stuff. Staging…