Getting Started The first thing I did after receiving the board was plug it in, connect the TRRS cable, and flash the VIA version of QMK onto the board. It works, the LEDs work, and after testing each switch socket with tweezers, they work. Time for the fun stuff. Staging…
Overview I decided to purchase the JNAO (Just Need An Ortho) board from keeb.io and do a custom keyboard build from the PCB up. It comes as a 5x12 layout with a break off bottom row to convert it to a 4x12 layout. I decided to use the 4x12…
Run this command to have the switch show you its management interface address: show lldp info local-device…
The direct link to app store is here: https://itunes.apple.com/us/app/macos-mojave/id1398502828?ls=1&mt=12 The official Apple article is here: https://support.apple.com/en-us/HT210190…
Follow these steps to set the DNS server for a network. 1. Navigate to the Settings Gear > Networks> Network Name > DHCP Name Server 2. Toggle the radio button to Manual and enter the desired DNS server address(es). 3. Hit Save. Your clients will not get this…
If you connect your media to Plex from your NAS, this command might be useful. It mounts the share with full read/write permissions. This is useful for when you want to delete media from inisde the Plex interface (from your couch for instance).…
Open up Terminal.app and paste sudo killall -HUP mDNSResponder.…
I recently aquired a Pakon F-135 35mm negative scanner. It's an ancient but wonderful way to quickly scan 35mm film without a flatbed scanner. Before I bought it, I searched around the internet for the installation software. All the information I saw recommended joining Facebook and asking the…